18 | Chapter 1: Connecting to the Internet
Mobile Broadband 11n Wireless Router MBR1000 User Manual
Ethernet Broadband Settings
To manually configure your Ethernet Broadband Internet settings:
1. Log in to the router as described in Logging In to Your Router on page 11.
2. From the main menu, select Ethernet Broadband Settings.
The following question displays at the top of the screen: Does Your Internet Connection
Require A Login?
Select the option based on the type of account you have with your ISP.
• If you need to enter login information every time you connect to the Internet or you
have a PPPoE account with your ISP, select Yes.
• Otherwise, select No.
Then fill out the appropriate screen (see Login required on page 19 or Login not
required on page 21).
Note: If you have installed PPP software such as WinPoET (from
Earthlink) or Enternet (from PacBell), then you have PPPoE. Select
Yes. After selecting Yes and configuring your router, you do not
need to run the PPP software on your PC to connect to the Internet.
To Next Page
Loading...
