Appendix A: Factory Default Settings and Technical Specifications | 99
A. Factory Default Settings and Technical
Specifications
Factory Default Settings
You can use the Restore Factory Settings button located on the bottom of your router to reset
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the
factory configuration settings that are shown in the following table.
Feature Default Behavior
Router
login
User login URL http://www.routerlogin.net or http://www.routerlogin.com
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
Connection
WAN MAC address Use default address
WAN MTU size 1500
Port speed AutoSense
Local
network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Disabled
Time zone PST for North America, GMT for other locations
Daylight saving time adjustment Disabled
To Next Page
Loading...
