Reference Guide for the Model MR314 Cable/DSL Wireless Router
Setting Up the Hardware 2-3
The Router’s Front Panel
The front panel of the Model MR314 router (Figure 2-1) contains status LEDs.
Figure 2-1. MR314 Front Panel
You can use some of the LEDs to verify connections. Table 2-1 lists and describes each LED on
the front panel of the Model MR314 router. These LEDs are green when lit, except for the TEST
LED which is amber.
Table 2-1. LED Descriptions
Label Activity Description
PWR (Power) On
Off
Power is supplied to the router.
Power is not supplied to the router.
TEST On
Off
Blinking
The system is not ready or has failed to start up.
The system is ready and running.
The system is initializing.
INTERNET (WAN)
LNK On The INTERNET port has detected a link with an attached device.
ACT (Activity) Blinking Data is being transmitted or received by the INTERNET port.
WIRELESS (LAN)
ON On The wireless circuit is functional.
To Next Page
Loading...
