EasyManua.ls Logo

NETGEAR MR314 - Page 26

NETGEAR MR314
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Guide for the Model MR314 Cable/DSL Wireless Router
2-4 Setting Up the Hardware
The Routers Rear Panel
The rear panel of the Model MR314 router (Figure 2-2) contains port connections, power
connection, and an antenna:
Figure 2-2. MR314 Rear Panel
The rear panel contains the following features:
•Antenna
12 VDC power adapter outlet
Internet Ethernet port for connecting the router to a cable or DSL modem
Four Local Ethernet ports for connecting the router to local PCs
Factory Default Reset pushbutton
Ground lug
ACT On Data is being tranmitted or received by the WIRELESS port.
LOCAL (LAN)
LNK/ACT
(Link/Activity)
On
Blinking
The LOCAL port has detected a link with an attached device.
Data is being tranmitted or received by the LOCAL port.
100 (100 Mbps) On
Off
The LOCAL port is operating at 100 Mbps.
The LOCAL port is operating at 10 Mbps.
Table 2-1. LED Descriptions

Other manuals for NETGEAR MR314

Related product manuals