Reference Guide for the Model MR314 Cable/DSL Wireless Router
Advanced Configuration of the Router 5-3
LAN Setup
The second feature category under the Advanced heading is LAN Setup. This menu allows
configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser
interface, under Advanced, click on LAN to view the LAN Setup menu, shown in Figure 5-1
Figure 5-1. LAN Setup Menu
DHCP
The Model MR314 router have the capability to act as a DHCP server, allowing them to assign IP,
DNS, and default gateway addresses to attached PCs. The assigned default gateway address is the
LAN address of the router. IP addresses will be assigned to the attached PCs from a pool of
addresses specified in this menu. Each pool address is tested before it is assigned to avoid
duplicate addresses on the LAN.
See “IP Configuration by DHCP”onpage B-10 for an explanation of DHCP and information
about how to assign IP addresses for your network.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. These
default settings are:
• DHCP server enabled with 32 client addresses starting from 192.168.0.1.
To Next Page
Loading...
