EasyManua.ls Logo

NETGEAR MR70

NETGEAR MR70
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 5. Factory default settings for the satellite (Continued)
Default SettingFeature
EnabledWiFi communicationWiFi
See satellite labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
2
Transmission speed
United States of America;
otherwise, varies by region
Country/region
2.4 GHz fronthaul: AutoRF channel
5 GHz backhaul and fronthaul:
Channel 44
2
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Technical specifications
The following are the technical specifications for your router and satellite
Technical specifications for router model MR70
The following table shows the technical specifications for the router.
Table 6. Technical specifications for the router
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic
DNS, UPnP, and SMB
Data and routing protocols
North America: 120V, 60 Hz, input
UK, Australia: 240V, 50 Hz, input
Europe: 230V, 50 Hz, input
All regions (output): 12V, 1A DC output
Power adapter
4.8 x 4.8 x 2.5 in. (121.92 x 121.92 x 63.5 mm)Dimensions
User Manual147Supplemental Information
Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite

Table of Contents

Related product manuals