14
Repeat this step for all of your computers and mobile devices.
9. Select the check box and click the Continue button.
10. Unplug the extender and move it to a new location closer to the
area with a poor WiFi signal.
The location you choose must be within the range of your existing
WiFi router network.
11. Plug the extender into an electrical outlet.
The Power LED lights solid amber while it is booting and then
solid green when it is powered on. If the Power LED does not
light, press the Power button.
Use the Link Rate LEDs on the front panel to help you
choose a spot where the extender-to-router connection is
optimal.
To Next Page
Loading...
