To access a device from a remote computer:
1. Launch a web browser on a computer that is not on your home network.
2. Connect to your home router:
The link that lets you access the device over the Internet is
https://public-ip-address/shares. In this link, public-ip-address represents one of the
following:
•
The IP address that is assigned to the router’s Internet port. You can view this IP
address on the ADVANCED Home page.
•
If you set up a DDNS account, the router’s DNS name, for example,
yourname.mynetgear.com.
For information about using Dynamic DNS (DDNS), see Set up and manage
Dynamic DNS on page 145.
3. If password protection is enabled (which it is by default), type your admin password.
You can now access your storage devices.
User Manual151Use Dynamic DNS to Access a
USB Storage Device From the
Internet
Nighthawk WiFi 7 Tri-Band Router Model RS300, Model RS280, Model BE9300
To Next Page
Loading...
