NETGEAR Nighthawk Setup Guide

Choose 2 Rent
Phone 1 (800) 622-6484
Fax 1 (866) 937-8254
info@choose2rent.com
www.choose2rent.com
version C2R-2 2019
page 1 of 3
NETGEAR Nighthawk LTE Mobile
Router Setup Guide
POWER ON - Press and hold he Power button on the mobile router for three
seconds.
POWER OFF – Press and hold the Power button for five seconds
WAKE/TOGGLE SCREENS – Tap the Power button and release quickly
Understanding your Device
1. LCD Screen
2. Power
3. Signal Strength
4. Network type
5. Active Uplink or downlink (displays only during transfer)
6. Data usage
7. Number of connected devices

NETGEAR Nighthawk Specifications

General

WiFi Technology	802.11ac
Antenna	3 external antennas
Beamforming	Yes
Beamforming+	Yes
Dynamic QoS	Yes
Smart Connect	Yes
MU-MIMO	Yes
VPN Support	Yes
Guest Network	Yes
Parental Controls	Yes
Processor	1GHz Dual Core
Ethernet Ports	4 Gigabit LAN ports, 1 Gigabit WAN port
USB Ports	1 x USB 3.0
Dimensions	11.22 x 7.26 x 1.97 inches
Wi-Fi Band	Dual-band (2.4GHz & 5GHz)
Memory	128MB Flash