Quick Start Guide
PRO
Attach the Mounting
Base
Orbi Pro Router
(Model SRR60)
Ethernet cable
Power adapter
(varies by region)
Package Contents
Rubber feet
(2 sets)
Ceiling-Mounting
Wall brackets (2)
1
2
1
1
2
3
4
Ceiling bracket (2)
T-bracket with
screw (2)
T-bracket
screws (2 sets)
Wall anchors with screws (2 sets)
Mount bases (2)
Mount covers (2)
Loosen the screw so that the
locking plate can slide. Tighten
when secure to the T-bar
2
Wall-Mounting
Attach the mounting base and the
mount cover for wall-mounting or
ceilling-mounting.
Mount base
screws (2 sets)
Support
Thank you for purchasing this
NETGEAR product. You can visit
https://www.netgear.com/support/
to register your product, get help,
access the latest downloads and user
manuals, and join our community. We
recommend that you use only ofcial
NETGEAR support resources.
Si ce produit est vendu au Canada,
vous pouvez accéder à ce document
en français canadien à
https://www.netgear.com/support/
download/.
(If this product is sold in Canada, you
can access this document in Canadian
French at https://www.netgear.com/
support/download/.)
For regulatory compliance information
including the EU Declaration of
Conformity, visit
https://www.netgear.com/about/
regulatory/.
See the regulatory compliance
document before connecting the
power supply.
If you want to extend your WiFi
coverage, we recommend that you
purchase an Orbi satellite. For more
information about which satellite you
should purchase, visit
https://www.netgear.com/support/.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference
purposes only.
September 2018
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
To Next Page
Need help?
General
