To Next PageTo Next PageHow to test the LAN path to my NETGEAR Wireless Router?
To test the LAN path to your router, check the physical connections. For a wired connection, ensure that the numbered LAN port LED is lit for the port to which you are connected. Additionally, verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer to ensure correct network configuration.
General| WiFi Technology | 802.11ac |
|---|---|
| Coverage | Up to 5, 000 sq ft |
| Ethernet Ports | 4 Gigabit Ethernet ports |
| USB Ports | 1 USB 2.0 port |
| Memory | 512MB NAND Flash and 512MB RAM |
| Antenna | Internal antennas |
| Security | WPA2-PSK |
| Beamforming | Implicit & Explicit Beamforming for 2.4GHz & 5GHz bands |
| WiFi Speed | AC3000 (1733 + 866 + 400 Mbps) |
| Weight | 1.96 lb |
| Processor | 710MHz quad-core processor |
| Dimensions | 6.7 x 3.1 x 8.9 inches |
Explains the behavior of LED indicators on the Orbi WiFi system for routers and satellites.
Provides step-by-step instructions to connect the Orbi router to the network and power source.
Guides on where to position the Orbi satellite for optimal WiFi signal coverage.
Details the process of synchronizing Orbi satellites with the router for network expansion.
Instructions for establishing a wired connection between Orbi devices for enhanced data transfer.
Explains how to connect devices to the Orbi network via wired Ethernet or WiFi connections.
Guides on how to access and manage the router settings via a web browser interface.
Details the automated process for configuring the router's internet connection using ISP settings.
Walks through using the setup wizard for initial router configuration and detection of Internet settings.
Provides steps for manual configuration of the internet connection settings, including IP and DNS.
Explains how to set up parental controls for managing children's internet usage via router or app.
Guides on activating and managing the cybersecurity features of NETGEAR Armor using the mobile app.
Describes how to configure access control rules for devices attempting to connect to the network.
Updating the WiFi network password and security protocol (WPA options).
Instructions for checking and updating the firmware on Orbi routers and satellites.
How to change the router's administrator login password for enhanced security.
Steps to recover or reset a forgotten router admin password using the configured security questions.
Setting up rules to forward specific incoming traffic to designated local servers or computers.
Configuring rules for dynamically opening incoming ports based on outbound traffic triggers.
Steps to establish a virtual private network (VPN) connection to the router for secure remote access.
Configuring the router to use a specific VPN service, including port and protocol settings.
Instructions for installing the OpenVPN client software on Windows, Mac, iOS, and Android devices.
Steps to resolve issues where the router and satellite fail to synchronize properly.
Solutions for problems preventing login to the router's web interface, including password recovery.
Steps to diagnose and fix common internet connectivity issues.
Solutions for issues related to connecting to the Orbi WiFi network, including security and signal problems.
