NETGEAR Orbi RBR50 User Manual

Table 8. Factory default settings for the satellite (Continued)
Default SettingFeature
EnabledWiFi communicationWiFi
See satellite labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
5
Transmission speed
United States in the US; otherwise,
varies by region
Country/region
2.4 GHz front and back haul: Auto
5 GHz front haul:
•
Channel 48 for NA, PR, AU, CA,
and TW
•
Channel 36 for EU, KO, JP, and
IN
5 GHz back haul:
•
Channel 157 for NA, PR, AU, CA,
and TW
•
Channel 108 for EU, KO, JP, and
IN
RF channel
5
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Factory settings for Orbi satellite model RBS20
The following table shows the factory default settings for the satellite.
Table 9. Factory default settings for the satellite
Default SettingFeature
orbilogin.comUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
User Manual151Supplemental information
Orbi WiFi System

NETGEAR Orbi RBR50 Specifications

General

WiFi Technology	802.11ac
Coverage	Up to 5, 000 sq ft
Ethernet Ports	4 Gigabit Ethernet ports
USB Ports	1 USB 2.0 port
Memory	512MB NAND Flash and 512MB RAM
Antenna	Internal antennas
Security	WPA2-PSK
Beamforming	Implicit & Explicit Beamforming for 2.4GHz & 5GHz bands
WiFi Speed	AC3000 (1733 + 866 + 400 Mbps)
Weight	1.96 lb
Processor	710MHz quad-core processor
Dimensions	6.7 x 3.1 x 8.9 inches