NETGEAR Orbi RBR50 Quick Start Quide

Connect your computer or mobile device to the Orbi router with an Ethernet or WiFi
connection.
To connect with WiFi, find the preset WiFi network name (SSID) and password on the label
on the Orbi router and connect to that network from your WiFi‑enabled computer or mobile
device.
Launch a web browser and visit orbilogin.com. If a login window opens, enter the user name
and password. The user name is admin and the default password is password.
Follow the onscreen instructions to set up your Orbi network.
The Orbi router’s ring LED turns o aer the setup is complete.
1. Connect Your Orbi Router
Unplug your modem and remove and replace the backup battery if it uses one.
Plug the modem back in.
Use the included Ethernet cable to connect your modem to the yellow Internet port on your
Orbi router.
Connect your Orbi router to a power source.
If the Power LED on the back of the Orbi router does not light, press the Power On/O
button.
Wait for the Orbi router’s ring LED to light white.
Modem
2. Set Up Your Orbi Network
Quick Start Guide

NETGEAR Orbi RBR50 Specifications

General

WiFi Technology	802.11ac
Coverage	Up to 5, 000 sq ft
Ethernet Ports	4 Gigabit Ethernet ports
USB Ports	1 USB 2.0 port
Memory	512MB NAND Flash and 512MB RAM
Antenna	Internal antennas
Security	WPA2-PSK
Beamforming	Implicit & Explicit Beamforming for 2.4GHz & 5GHz bands
WiFi Speed	AC3000 (1733 + 866 + 400 Mbps)
Weight	1.96 lb
Processor	710MHz quad-core processor
Dimensions	6.7 x 3.1 x 8.9 inches