Need help?Do you have a question about the NETGEAR PowerLINE 2000 and is the answer not in the manual?
General| Model | PLP2000 |
|---|---|
| Speed | 2000 Mbps |
| Technology | HomePlug AV2 |
| Pass-through Outlet | Yes |
| Encryption | 128-bit AES |
| LED Indicators | Power, Ethernet, Powerline |
| Pick-a-Plug LED | Yes |
| Push-and-Secure Button | Yes |
| Operating Humidity | 10% to 90% non-condensing |
| Ports | Gigabit Ethernet |
| Standard | IEEE 1901 |
| Plug Type | Type A (US) |
| Operating Temperature | 0°C to 40°C |
| Weight | 0.6 lb (0.27 kg) |
Details the hardware features of the PLP2000 adapter, including LEDs, ports, and buttons.
Explains the meaning of the Power, Ethernet, and Pick A Plug LEDs on the adapter.
Details the functions of the Security/Factory Reset button for network setup and resets.
Explains how the Ethernet port is used to connect devices for wired network access.
Covers restrictions and guidelines for using the integrated extra outlet.
Describes the unique information provided on the adapter's label, such as MAC address.
Explains how PowerLINE adapters extend Internet access via electrical wiring.
Guides users through creating a new PowerLINE network using adapters.
Details the process of incorporating additional adapters into an established PowerLINE network.
Explains the importance of encryption keys for securing PowerLINE networks.
Provides step-by-step instructions for using the reset button to create a private encryption key.
Describes the expected LED sequence and initial checks for troubleshooting.
Provides solutions for when the Power or Ethernet LEDs are not lit.
Lists detailed technical features and performance parameters of the PLP2000 adapter.
Outlines essential safety guidelines for using the PowerLINE adapter and its components.
To Next Page