NETGEAR WGR614v10 - 54 Mbps Wireless Router Installation Guide

Wireless-N Router
WGR614v10
Step 1:
Connect your modem.
Step 2:
Connect your router.
Step 3:
Connect your computer.
Step 6:
Insert your CD.
Click Setup and follow
the steps to set up a secure
wireless network.
Step 5:
Power on your router.
Wait until the power LED
turns turns solid green.
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a battery-backed modem,
press the reset button. (In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.)
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
DSL or Cable
Internet
Wireless Router
Modem
(not included)
Resource CD
Laptop or Desktop
Computer
Wireless Router
Wireless-G Router
WGR614v10
Resource CD
Package Contents:
Wireless-G Router
WGR614v10
Installation Guide
Power AdapterEthernet Cable
Power on/off
Note: If your laptop does not have a
CD drive, see “No CD Drive” Installation
on the back to complete your router setup.

NETGEAR WGR614v10 - 54 Mbps Wireless Router Specifications

General

Brand	NETGEAR
Model	WGR614v10
Wireless Speed	54 Mbps
Wireless Standard	802.11g
Frequency Band	2.4 GHz
LAN Ports	4
WAN Port	1
Security	WEP, WPA, WPA2
Weight	0.27 kg