NETGEAR WGR614v10 User Manual

Installation Guide
1. Prepare your modem.
Unplug your modem. If it has a battery
backup, remove the battery.
5. Launch a browser.
3. Power on the router.
Wait for the Wireless LED ( ) to light.
Package Contents
G54 Wireless Router
WGR614v10
Power adapterEthernet cable
Wireless router
Attach the stand to the router:
1. Place the stand on a level surface.
2. Slide the router onto the stand.
Wireless router
4. Connect a computer.
Router stand
2. Connect your modem.
If the NETGEAR genie page does
not display, type http://www.routerlogin.net.
Plug in your modem. Put the battery
back in. Then cable the modem to the
Internet port on the router.
Power On/Off

NETGEAR WGR614v10 Specifications

General

Wireless Standard	802.11b/g
Frequency Band	2.4 GHz
Security	WEP, WPA, WPA2
Wireless Data Rates	Up to 54 Mbps
WAN Ports	1 x 10/100 Mbps
Firewall	SPI, NAT
LAN Ports	4 x 10/100 Mbps
Weight	0.7 lb (0.32 kg)

Summary

Router Setup and Connection

Modem and Router Connection

Prepare modem, connect to router's Internet port, and power on.

Computer Connection and Access

Connect computer to router and launch browser to access settings.

Attach Router Stand

Place router on a level surface using the provided stand.

Preset Wireless Security

Record Default Wireless Settings

Find and record the default WiFi network name (SSID) and password.

Update Wireless Settings

Record any custom WiFi network name (SSID) and password if changed.

Connect Wireless Devices

Manual Connection Method

Connect devices by scanning for the network name (SSID) and entering the password.

WPS Connection Method

Use Push 'N' Connect (WPS) for quick device connection without password.

Troubleshooting and Features

Browser Troubleshooting

Ensure computer is connected to router and browser is refreshed.

Accessing Additional Features

Log in to router for advanced features and NETGEAR genie app.

Equipment Placement Warning

Ensure adequate airflow around equipment; do not stack.