NETGEAR WNR3500L - RangeMax Wireless-N Gigabit Router Installation Guide

N ETGEAR
Wireless-N Router
WNR3500L
Wireless-N Router
WNR3500L
Step 1:
Connect your modem.
Step 2:
Connect your router.
Step 3:
Connect your computer.
Step 6:
Insert your CD.
Click Router Setup and follow
the steps to set up a secure
wireless network.
Step 5:
Power on your router.
Wait until the power LED
turns solid green.
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a battery-backed modem,
press the reset button. (In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.)
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
DSL or Cable
Internet
Wireless-N Gigabit Router
Modem
(not included)
Power on/off
Resource CD
Laptop or Desktop
Computer
Wireless-N Gigabit Router
Resource CD
Package Contents:
Wireless-N Gigabit Router with USB
WNR3500L
Installation Guide
Power AdapterEthernet Cable
Note: If your laptop does not have a
CD drive, see “No CD Drive” Installation
on the back to complete your router setup.

NETGEAR WNR3500L - RangeMax Wireless-N Gigabit Router Specifications

General

Model	WNR3500L
Wireless Standard	802.11n
Frequency Band	2.4 GHz
Wireless Speed	Up to 300 Mbps
LAN Ports	4
WAN Ports	1
USB Ports	1
Firewall Features	SPI, NAT
Antenna	Internal
RAM	64 MB
Flash Memory	8 MB
Storage Humidity	5% to 95% non-condensing
Wired Speed	10/100/1000 Mbps
Security	WPA, WPA2, WEP
VPN Support	VPN pass-through
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Weight	0.48 kg (1.06 lb)
Power Supply	12V DC, 1.5A