Need help?Do you have a question about the Netro PIXIE-Z1 and is the answer not in the manual?
Guide to obtaining the Netro application for mobile devices from app stores.
Steps to create or log in to a Netro account for timer setup and device management.
Instructions for inserting two AA alkaline batteries into the Pixie-Z1 timer.
Process of linking the Pixie-Z1 timer to your Netro account via the Netro app.
Guide on physically attaching the timer to an outdoor hose faucet.
Steps to check and ensure a stable Zigbee signal connection for the timer.
How to select a different weather data source in the Netro app settings.
Explanation of automatic smart watering schedules based on conditions and regulations.
Description of manual program setup with weather-based skips for watering.
Details on battery type, life, and how to replace it when low.
LED indications for waiting for configuration, searching, and connecting to the Hub.
LED signals for watering, reset, and connection failures.
Quickly press once to pair the Pixie-Z1 with the Hub for account addition.
Press twice to power the Pixie-Z1 on or off.
Press and hold for five seconds to reset the Pixie-Z1 to factory settings.
Information on where to find help, support contact, and legal notices.
Details on timer dimensions, weight, WiFi, operating temperature, and water pressure.
Details of the two-year limited warranty for defects in materials and workmanship.
Important information regarding liability limitations for consequential damages.
General| Model | PIXIE-Z1 |
|---|---|
| Connectivity | Wi-Fi |
| Frequency | 60Hz |
| Timer Channels | 1 |
| Timer Settings | Customizable via App |
| Display | No |
| Operating Temperature | 14°F - 140°F (-10°C - 60°C) |
| Storage Temperature | -20°C to 60°C |
| Dimensions | 140 x 100 x 50 mm |
| Type | Smart WiFi Sprinkler Timer |
To Next Page