1. Overview
2. Package Checklist
3. Description of Panel Layout
Front Panel
Rear Panel
NR701C
Quick Installation Guide
The NR701C/ NR300C series RAID subsystem is a cost effective
solution designed for Audio/Video studio, standalone DVR and SMB
backup that demands external storage with RAID level protection, high
transmission speed and easy-to-deploy features for Four(4) SATA II
disks in a very small footprint or 1U Rackmount. Simply single
connecting to the host computer by either high speed USB, FireWire
400/800 or eSATA port requiring no extra drivers, the NR701C/NR300C
can be easily attached to any standard PC or MAC platforms.
Before installing this unit, verify that package contains the following
items.
Enclosure x 1
HDD tray (installed in NR701C) x4
Power Cord x1
User manual CD x1
Hard drive mounting screw x16
Key for HDD tray x2
eSATA cable x 1
Firewire B cable x 1
USB cable x 1
A
B
C
D
E
F
G
H
I
A B C D
E F G H I
1. Buzzer mute button
2. Temperature Status LED
3. Fan Status LED
4. Power Status LED
5. RAID Status LEDs
6. HDD Power LED
7. HDD status
Notify your sales representative if any of the above items are missing or
damaged.
Page. 1 Page. 2 Page. 3
Green – Normal
Red – Overheat (Over 55°C)
Green – Normal
Red – Fail (too slow or not spinning)
Blue – current RAID mode
Red (flashing) – RAID mode selecting (not confirmed)
Red – RAID mode confirmed
Blue – access
Red – fail
1. FireWire A connector
2. FireWire B connector
3. Mini USB connector B type
4. eSATA connector
5. RAID Mode Switch
6. RAID Mode Confirm Button
7. Kensington Security Slot
8. Power Cord Receptacle
9. Power On/Off Switch
Either one can be connected to the computer.
The other one can be connected to another FireWire B device.
First Edition, Jun. 2009
Desktop 4-bay Quad-interface SATA Raid Subsystem
1 2 3 4 5
6
7
1 2 3 4 5 6
8 9
7
To Next Page
Need help?
General