6
Vigil 2 Installation
Check following things before you starting to drill holes on your wall:
1. Vigil 2 has been successfully added to your Netvue App and is able
to stream video.
2. Have planned the cable route. Measured the length of the power
cable and Ethernet cable (if you plan to use Ethernet connection) you
will need.
Step 1:
Find a good installation spot.
We recommend installing the Vigil 2 just 7-10 feet (2-3 meter) above
the ground for a better two-way audio experience.
There is a power outlet nearby.
Test whether Vigil 2 can stream video smoothly at the spot.
Make sure nothing blocks the camera’s sight.
To Next Page