Need help?Do you have a question about the NetworX NX-4 and is the answer not in the manual?
General| Zones | 4 |
|---|---|
| Power Supply | 16.5 VAC, 40 VA transformer |
| Backup Battery | 12 VDC, 4 AH |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Partitions | 1 |
| Programmable Outputs | 2 |
| Outputs | 2 programmable outputs |
| Power Supply Range | 16.5 VAC |
| Battery Backup | 12 VDC, 4AH |
| Communicator Formats | Contact ID |
| Communication | PSTN |
Guides users on diagnosing system faults indicated by the service light and zone lights.
Instructions for activating fire, auxiliary emergency, and police alarms via dedicated keys.
Step-by-step guide for arming the system in ON or PARTIAL modes and disarming it.
How to bypass specific zones or perform group bypasses when arming the system.
Instructions for changing user codes and assigning different authority levels.
Instructions for programming and viewing system telephone numbers for reporting.
How to access and interpret stored alarm event history and bypassed zones.
Procedure for resetting smoke detectors, zone troubles, and zone tampers.
Instructions for setting the system's current date and time accurately.
How to adjust the volume or pitch of the code pad's audible feedback.
Procedure for testing system zones and sensors without triggering alarms or reporting.
Explains the various beep patterns and sounds from the control panel and their meanings.
To Next Page
