Need help?Do you have a question about the NETZSCH LFA 447 Nanoflash and is the answer not in the manual?
General| Accuracy | ±3% |
|---|---|
| Repeatability | ±2% |
| Data Acquisition | High-speed data acquisition system |
| Measurement Principle | Laser Flash Method |
| Light Source | Laser |
| Detector | Infrared Detector |
| Atmosphere | Inert gas (e.g., nitrogen, argon) or vacuum |
| Thermal Conductivity Range | 0.1 to 1000 W/(m·K) |
| Specific Heat Capacity Range | 0.1 to 5 J/gK |
| Thermal Diffusivity Range | 0.01 to 1000 mm²/s |
| Software | LFA Software |
| Measurement Time | A few seconds per measurement |
| Power Supply | 110-240 V, 50/60 Hz |
| Dimensions | 600 x 400 x 300 mm |
To Next Page