Need help?Do you have a question about the NEU MASTER NTC0023-18 and is the answer not in the manual?
Advises on using protective gear (eyes, ears, hands, mask) and avoiding water immersion.
Warns about hazardous chemicals in construction dust and recommends safety measures.
Lists and identifies all components of the cordless tacker and its battery pack.
Details the types and sizes of staples and nails compatible with the tool.
Explains charging procedures, indicator lights, and battery status.
Provides step-by-step instructions for inserting and removing the battery pack.
Illustrates the process for loading staples into the magazine.
Details how to load nails and shows compatible nail lengths.
Demonstrates how to use the trigger and contact safety for firing fasteners.
Shows an example of improper handling that should be avoided.
Explains how to adjust the impact control knob for different applications.
Illustrates proper techniques for firing fasteners onto work surfaces.
Provides step-by-step instructions and diagrams for clearing jammed fasteners.
Defines the tool's intended purpose, general safety rules, and risk avoidance.
Covers safety in the work area, proper tool handling, and general usage guidelines.
Details how to maintain the tool, clean components, and ensure proper operation.
Provides specific safety instructions for operating handheld tackers.
Details hazards associated with batteries and provides crucial safety precautions.
Outlines safety guidelines for using the battery charger.
Advises on safe practices for using the battery charger, including cord handling and environment.
Lists the technical details of the tool and its charger, such as voltage and output.
This document is an instruction manual for the NEU MASTER NTC0023-18 Cordless Tacker, a versatile tool designed for both stapling and nailing applications. The manual provides essential information on the device's components, charging procedures, battery installation, staple and nail loading, operation, and maintenance, ensuring safe and effective use.
The NEU MASTER NTC0023-18 Cordless Tacker is a handheld power tool primarily used for fastening staples and nails into various materials. It operates on a rechargeable battery pack, offering cordless convenience and portability. The tool features a contact safety mechanism, an LED light for improved visibility, and an impact control adjustment knob to regulate the fastening force. The trigger activates the tool, while the handle provides a secure grip during operation. The magazine holds the staples or nails, which are loaded via a magazine release clip. A no-marring nose tip helps prevent damage to the workpiece surface.
The device is designed for domestic use and is not intended for outdoor use or in wet conditions. It is crucial to use the correct type and size of staples and nails as specified in the manual to ensure optimal performance and prevent damage to the tool or workpiece. The tacker is capable of driving staples with a crown and lengths ranging from 15-25 mm, and nails with gauges and lengths of 15, 20, 25, 30, and 32 mm.
The manual outlines a straightforward process for preparing and operating the cordless tacker.
The battery pack features indicator LEDs (11) that display the charge level, activated by a battery power display button (10). Charging is indicated by a red light flashing with a green light. A hot/cold delay is signaled by a flashing red light, while a long green light indicates a full charge. If there's a problem with the pack or charger, both red and green lights will flash. The charger pins (12) connect to the battery, and the charger itself has red (13) and green (14) lights to indicate charging status.
To install the battery pack, slide it into the designated slot until it clicks securely into place. Removal involves pressing the battery release button (9) and sliding the pack out.
For staples, the magazine release clip (6) is pressed to open the magazine (7). Staples are then inserted into the magazine, ensuring they are correctly oriented, and the magazine is closed. For nails, the process is similar: open the magazine, insert the nails, and close the magazine. The manual illustrates how to load both staples and nails, emphasizing the correct direction for insertion.
Before operation, ensure the battery is fully charged and correctly installed. The contact safety (1) must be pressed against the workpiece before the trigger (4) can be pulled to fire a staple or nail. The impact control adjustment knob (3) allows users to adjust the fastening depth, which is useful for different materials and desired finishes. The manual shows how to adjust this knob to increase or decrease the impact force.
The LED light (2) illuminates the work area, providing better visibility, especially in dimly lit environments. The no-marring nose tip (8) protects the workpiece surface from impressions or damage during fastening. The manual also illustrates how to engage and disengage the contact safety mechanism, which is a critical safety feature.
In the event of a jam, the manual provides clear instructions on how to safely clear it. This typically involves removing the battery pack, opening the magazine, and carefully extracting the jammed fastener. The contact safety mechanism should be disengaged, and the nose tip may need to be opened to access the jammed fastener. It is crucial to follow these steps to avoid injury and damage to the tool.
Proper maintenance is essential for the longevity and safe operation of the NEU MASTER NTC0023-18 Cordless Tacker.
The tool should be kept clean and free from dirt and dust. The manual advises wiping the tool with a clean, dry cloth. For stubborn dirt, low-pressure compressed air can be used to clean ventilation slots and the motor housing. It is important never to immerse electrical components or the entire tool in water.
The battery pack should be protected from water, moisture, heat, and direct sunlight. It should be stored in a dry place and not left on prolonged charge when not in use. If the battery terminals become dirty, they should be wiped with a clean, dry cloth. If a cell leaks, avoid contact with skin and eyes, and seek medical advice immediately.
Regularly inspect the power tool for any signs of misalignment, binding of moving parts, breakage, or other conditions that might affect its operation. External nuts and fixings should be checked to ensure they have not loosened due to vibration. If any damage is found, the tool should be repaired by a qualified person before further use.
When not in use, the cordless tacker should be stored out of reach of children, in a dry, locked unit. The battery pack should be removed from the tool during storage. The charger cable should be positioned to prevent it from being stepped on, tripped over, or subjected to damage or stress.
The manual emphasizes several safety precautions, including wearing eye protection, dust masks, and other personal protective equipment. It warns against operating the tool in explosive atmospheres, overreaching, or using it while tired or under the influence of substances. It also highlights the importance of preventing unintentional starting by ensuring the switch is in the off position before handling the tool or battery.
By adhering to these instructions, users can ensure the safe, efficient, and prolonged use of their NEU MASTER NTC0023-18 Cordless Tacker.
Power| rated voltage | 18V 2.0Ah |
|---|---|
| charger input | 100-240VAC 50/60Hz 70W |
| charger output | 21VDC 2.4A |
To Next Page
