Need help?Do you have a question about the Neunaber Expanse Series and is the answer not in the manual?
Details power input, instrument/amp inputs, and mono/stereo configurations.
Outlines the two-step method for programming pedal settings.
Explains selectable bypass types and secondary footswitch functions.
Describes the start-up sequence for modifying pedal configurations.
Explains how to use and configure tap tempo for effects.
General| Input Impedance | 1 MΩ |
|---|---|
| Effects Types | Reverb |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 1 x 1/4" Mono/Stereo |
| MIDI | MIDI In |
| USB | Yes (for firmware updates and preset management) |
| Power Source | 9V DC power supply (not included) |
| MIDI Control | Yes |
| Power Requirements | 9V DC, center negative |
| True Bypass | Yes |
| Dimensions | 4.7" x 3.7" x 1.4" (120 x 94 x 36 mm) |
| Weight | 12 oz (340 g) |
| Algorithms | Multiple proprietary reverb, delay, modulation, and pitch algorithms |
To Next Page
