Need help?Do you have a question about the neuroConn DC-Stimulator and is the answer not in the manual?
Crucial safety information and warnings for device operation.
Guidelines for safe electrode placement and current density to prevent injury.
Explanation of the device's safe current reduction feature for user comfort.
Recommended room temperature, humidity, and air pressure for operation.
Identification of the device's upside, bottom, front sides, sockets, and icons.
Description of the adapter box and starter set components.
Explanation of symbols and information presented on the device type label.
Information on built-in rechargeable batteries and charging procedures.
Instructions for powering the device on, off, and entering standby mode.
How to connect and use the external charger for device charging.
Proper methods for connecting electrodes to the device sockets.
Guidelines for cleaning and storing rubber electrodes to maintain performance.
Procedures for cleaning and storing sponge pads for reuse.
How the device checks and monitors electrode impedance before and during stimulation.
Information on connecting external trigger sources for remote operation.
Instructions for cleaning the device and its cables safely.
Guidance on safely transporting and storing the DC-STIMULATOR.
Overview of the device interface and button functions for operation.
How to select and modify stimulation parameters like current and duration.
Details on setting up and applying transcranial direct current stimulation.
Procedures for initiating, monitoring, and terminating stimulation sessions.
How the system monitors impedance in real-time during active stimulation.
Information on how stimulation automatically stops after the set duration.
Accessing system settings like trigger input, impedance, language, and study mode.
Options for enabling or disabling external trigger functionality for remote control.
Setting the acceptable impedance range for stimulation to ensure safety.
How to load predefined parameter sets or save custom configurations.
Using the device for comparative studies, including sham stimulation codes.
Customizing device language, acoustic signals, and display backlight.
Using a password to access and modify settings in active study mode.
Key performance metrics for current output and stimulation time.
Physical dimensions, weight, power, and connector details.
Range and accuracy of DC current, signal generation, and timing.
Technical requirements for external trigger sources.
Guidelines for maintaining compatibility with electronic environments.
Manufacturer's declaration regarding RF emissions compliance.
Manufacturer's declaration regarding immunity to electromagnetic disturbances.
Criteria for device performance during exposure and separation guidelines for RF devices.
Information on device warranty, required maintenance, and end-of-life return.
Details on periodic safety checks and metrological controls for the device.
Contact details for the primary manufacturer and distributors.
Listing of distributors in various regions worldwide.
Contact information for distributors in Australia and Oceania.
Contact details for distributors in the Benelux region.
Contact information for the Canadian distributor.
Contact details for the distributor in China.
Contact information for the United States distributor.
Description of the device's purpose and its critical performance features.
Target age, weight, state, and required qualifications of users.
Conditions for use, when not to use, and potential side effects of the therapy.
Summary of recommended parameters for treating specific conditions.
Details on the manual's accuracy, validity from serial number, and version.
Usage, application, and safety handling for electrodes and sponge pads.
Instructions for applying Ten20 conductive paste for electrode attachment.
General| Brand | neuroConn |
|---|---|
| Model | DC-Stimulator |
| Category | Personal Care Products |
| Language | English |
To Next Page