NeuroMyst Pro - Page 7

5
Need Help?
Point your phone
camera at the
tiny dots and click
the yellow link.
Step 3: Prepare the Electrodes
The L-shaped plug
connects to the
device's top.
3
Find pin connector
4
Connect electrodes
(front side) (back side)
Place one sponge on
top of each electrode
Place each electrode
into a plastic case
+
Get the parts
1
Assemble electrodes
2
2x sponges
+ +
2x electrodes
2x cases
Soak each sponge
with saline
Turn the sponge electrode on its
back side. There is a small pinhole
connector. See the orange square.