Neuros Technology International, LLC. 650 W. Lake Street, Suite 330. Phone: 312 756 0061, www.neurostechnology.com
Copyrights 2006 Neuros Technology International, LLC. All Rights Reserved, Chicago, IL.
Neuros MPEG-4 Recorder 2:
A mini digital recorder for your handhelds
Remote Control
Set up
1. Connect the AC/DC adapter to a power outlet and the DC power port on the back of
the Recorder.
2. Connect one A/V cable to the video source (Red, White and Yellow connections),
and the other end of the cable to the AV in port on the back of the recorder.
3. Connect the second A/V cable to your TV (Red, White and Yellow connections), and
the other end of the cable to the AV out port on the back of the recorder.
Powering on the Recorder 2
Set your TV on the right video channel to see the on screen menu and press the Power
button on the remote.
Navigate through the menu
The main menu has 6 different categories: Photo, Music, Video, Recorder, Setup, File
Browser. Navigate the main menu using the remote control. Once highlighted, you can
enter a category by pressing the Enter button on the remote.
Recording a Video
1. Insert a memory card in the appropriate slot on the front of the unit.
2. Once the recorder is ON, pressing the Recording button on the remote will
immediately start a recording. Pressing the Recording button again will stop the
recording.
Return/
Stop
Enter
Menu
Power
Record/
Stop
Play/
Pause
To Next Page
Need help?
General
