User manual
14.3 Traveling speeds
Slow
a) The gears are regulated by a switch on the instrument
panel.
Fast (overdrive)
b) There is an additional switch on the left drive lever to
switch
quickly to overdrive while driving.
ATTENTION: Do not use the overdrive when traveling
around
a curve!
c) The speed is controlled with the drive lever
(pedal).
Pressed all the way = max. speed for that gear.
15 Shutting down
o
Stop the machine.
Lower bucket and dozer blade to the ground.
Let engine idle (Accelerator position "0").
Turn off ignition.
Never turn off the engine at full power.
Allow
the engine to idle for at least 1 Min. before
turning the engine off.
o
o
ATTENTION:
o
Turn the key to the "O" position and remove it before
leaving
the vehicle.
CAUTION: Unauthorized use of the excavator must be
prevented. Lock the cab.
Park on level ground.
If the excavator has to be parked on an incline, place
chocks under
the tracks.
o
9707672_user manual_en
- 51 -
To Next Page
Loading...