Option
Overload warning device:
This is a visual or acoustic warning device indicating to the driver
that the
admissible useful load or the burden and/or the load moment
equivalent
to the useful load or burden is reached.
The option hoisting operation is provided with the following
equipment:
-safeguarding facility against breakage at jib cylinder
-visual/acoustic warning device when the admissible useful load
or
burden is exceeded
28.3 Electrically Actuated Auxiliary Hydraulics
In this case the auxiliary hydraulic system is controlled via the
joystick
instead of the pedal. Due to this function operation of the
attached tool
becomes much easier for the driver.
The following must be absolutely observed:
1. In case of this option the function of the auxiliary hydraulic
system
is switched "black and white". This means that precision
control is not possible as it would be in case of pedal
control.
If this option is used for offset buckets (e.g. in case of
levelling)
there may be jerking motions of the boom or the dipper
stick.
2.
control lever left
pushbuttons
9707672_user manual_en
- 79 -
To Next Page
Loading...