ELMYRA 2 v2.1
by neutral labs
Build Guide
Elmyra 2 comes with all SMD components presoldered, and as such it is
a very straightforward build. Due to the large number of front panel
components, it will take some time though (1-3 hours depending on
level of experience). Some of the soldering will be in close proximity
to SMD parts, so care must be taken. The kit is intended for builders
of medium or advanced skill level, but can be completed by a motivated
and careful beginner (with some previous soldering experience). Please
read and follow the guide thoroughly!
To Next Page
Need help?
General
