Nevadent 385287 2107 - User Manual

Other manuals for Nevadent 385287 2107

Questions and Answers

C
Christina Herman MDAug 11, 2025
What to do if no water jet comes out of the Nevadent Accessories nozzle?
- J
  Jennifer RamirezAug 11, 2025
  If no water jet comes out of the Nevadent Accessories nozzle attachment, first ensure the appliance is properly connected to the power supply and switched on by setting the rotary switch to the desired water pressure level and switching the On/Off switch on the hand unit to 'I'. Also, make sure the mains plug is properly inserted into a functioning power socket and the house mains fuse is in working order. Check that the water tank is filled with tap water. If the issue persists, the nozzle attachment may be defective and need replacement. As a last resort, the appliance itself may be defective, requiring you to switch it off, pull out the mains plug, and contact Customer Service.
B
Brittany WarrenAug 21, 2025
What to do if no water jet comes out of Nevadent Personal Care Products nozzle?
- C
  Craig SnowAug 21, 2025
  If no water jet comes out of the nozzle attachment of your Nevadent Personal Care Product, here's what to check: * Ensure the appliance is properly connected to the power supply. Set the rotary switch to the desired water pressure level and switch the On/Off switch on the hand unit to 'I'. * Verify the mains plug is correctly inserted into a functioning power socket. Check the house mains fuse if the socket isn't supplying power. * Make sure the water tank is filled with tap water. * If none of these steps work, the nozzle attachment may be defective and needs replacement. If the appliance is still not working, switch it off, pull out the mains plug, and contact Customer Service.
U
ufranklinAug 31, 2025
What to do if no water jet comes out of Nevadent Dental equipment?
- M
  marcus40Aug 31, 2025
  If no water jet is coming out of your Nevadent Dental equipment, several factors could be at play. First, ensure the appliance is properly connected to the power supply and the rotary switch is set to the desired water pressure level, also switch the On/Off switch for the water jet to ‘I’. Check that the mains plug is correctly inserted into a functioning power socket and the house mains fuse is working. The water tank might be empty, so refill it with tap water. If none of these steps work, the nozzle attachment may be defective and need replacement. If the problem persists after checking these, switch off the appliance, disconnect it from the power, and contact Customer Service.