Need help?Do you have a question about the Neve 8803 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| EQ Bands | 4 |
| High Frequency | 12 kHz |
| High Mid Frequency | 3 kHz |
| Compressor | No |
| Phantom Power | No |
| Pad | No |
| DI Input | Yes |
| Power Supply | External |
| Polarity Reverse | Yes |
| Outputs | 2 x XLR |
Controls the power state of the unit via the Neve Logo switch.
Manages input signal level with trim, signal, and clip indicators.
Features High Pass and Low Pass filters with adjustable frequency.
Activates or bypasses all four EQ bands simultaneously.
Controls gain, frequency, and Q for the low EQ band, with Bell/Shelving and Q modes.
Controls gain, frequency, and Q for the low-mid EQ band.
Controls gain, frequency, and Q for the high-mid EQ band.
Controls gain, frequency, and Q for the high EQ band, with Bell/Shelving and Q modes.
Details the USB Type B connector for PC/Mac connection and recall functionality.
Describes input and output connections using XLR and 1/4" jack sockets.
Covers technical earth switch, fuse, and power DIN socket for grounding and power.
Step-by-step instructions for installing Neve Recall software on a PC.
Step-by-step instructions for installing Neve Recall software on a Mac.
Guide on locating and selecting the correct firmware file for the unit.
Details the steps for downloading firmware and successful/error messages.
Information on dealing with corrupted or old firmware versions.
To Next Page
