EasyManua.ls Logo

Neve Custom Series 75 User Manual

Neve Custom Series 75
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

For Software Version 3
revision: 2.2
15 May 2013 5:01 PM

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Neve Custom Series 75 and is the answer not in the manual?

Neve Custom Series 75 Specifications

General IconGeneral
BrandNeve
ModelCustom Series 75
CategoryRecording Equipment
LanguageEnglish

Summary

Introduction to Custom Series 75

Installation and Safety Precautions

Health & Safety Guidelines

Crucial safety aspects when setting up the console.

Master Section Rear Panel Connections

Channel Bin Rear Panel Details

Console Operation Procedures

Powering Up Procedure

Step-by-step guide for safely powering up the console.

Power Supply and Soft Start

Explanation of the console's power supply and soft start technology.

Sound Shaping and Mixdown Techniques

Retro and Modern Circuitry

Achieving classic or modern sonic character.

Mixdown and Group Operations

Module and Metering Details

The 2081 Module Overview

Explains the module's dual paths and controls.

Input Module and Auxiliaries

Input Module Controls

Details input selection, gain, trim, and phase controls.

EQ and Monitor Path Configuration

2081 EQ Features

Details the four-band EQ and its controls.

Channel Fader Functionality

Channel Path Fader

Describes the fader and its destination routing LEDs.

Master Section Overview

Master Section Features

Overview of master section components and controls.

Metering System Details

Metering Controls and Displays

Explains bargraph, VU, and phase meter functions.

2254 Compressor Unit

2254 Compressor Controls

Details controls for compression, limiting, and gain.

Channel Processing and Assignment

Limiter Functionality

Details limiter on/off, threshold, and recovery controls.

Assign Section and Routing

Explains routing, scene storage, and user features.

Scene Management and Customization

Scene Storage and Recall

Explains how to store, recall, and copy settings.

Oscillator and SLS Output

Group Send/Returns Configuration

Group Send Trims and Routing

Explains group send trims, panning, and input routing.

Reverb Returns and Headphone Sends

Metering and Console Modes

Channel and Master Meters

Explains meter controls and displays.

Console and Channel Modes

Details global and channel mode settings.

Control Room Monitoring System

Control Room Volume and Controls

Explains volume, speaker, and dimming controls.

Monitor Source Selection

Details the 12 sources selectable for monitoring.

Control Room Headphones

Explains headphone output and level control.

Fader Controls and Modifications

Console Modifications

Technical Block Diagrams

Wiring Diagrams

Master Section Rear Panel Pinouts

Related product manuals