Nevo SL - Controlling a Device

Controlling a Device
6 Nevo
SL
User Manual
• About Nevo
SL
displays a screen of copyright and system
configuration information. If you have trouble with Nevo
SL
,
customer support staff or your installer/integrator may ask you for
this information.
• System Status
This bar displays a set of icons that indicate system status:
• shows whether an IR signal is being sent. When there appear to
be red lines emitting from this base, Nevo
SL
is sending an IR signal.
• indicates WiFi status. If bars appear, you are connected to a
network. If no bars appear, you are not connected to a network. If
there is no WiFi icon, WiFi is not enabled.
• shows the remaining battery life. The lower this bar, the less
battery power is available. When the bar reaches the bottom and
turns red, dock and recharge you Nevo
SL
. You do not need to wait
until the bar is all the way at the bottom before recharging. When
Nevo
SL
is docked, the level cycles from low to high.
• displays the current time. See “Setting the Date and Time” on
page 24 for information on setting or changing the time.
• Navigation
Touch these buttons to cycle through the Home Control screens in a
given page collection. You can also use the toggle wheel to navigate
between these screens.
The touch area for the arrows extends into the function key labels, so
you have plenty of space to touch.
Controlling a Device
Control any home entertainment device by touching the touchscreen.
Your installer/integrator has configured the home control section to
best suit your home control environment. These pages may vary, but
will always contain a Home page, which is your starting point. Consult
your installer/integrator for more information on how your Nevo
SL
Home Control pages are configured.
touch area