New Cat Condos Cat Stairway User Manual

New Cat Condos Cat Stairway
SKU: 190109
Assembly Instructions
Package contents:
1 - Base, Middle Perch, Top Perch
3 - Connecting Rods
1 - Glue Bottle
Follow these easy steps:
Add glue to the visible ends of the rods & connect the middle perch to the top
of the base by inserting rod ends into the holes (see Figure 3).
1
In a large, open area, open the box
and remove all contents
3
2
Softly, insert each connecting rod containing glue into each hole of the middle
perch. Wipe off any excess of the glue with a wipe (see Figure 2).
Take the top perch & connect the screw (located under the top perch)
to the top of the middle perch & rotate clockwise until secured &
locked. DO NOT OVERTIGHTEN (see Figure 4).
4
Before placing the first 2 connecting rods into the holes, place a
generous amount of glue around the entire rod (see Figure 1).
5
6
Take the last Rod and add glue around one end, insert it in the hole
of the top perch, then add glue to the visible end & finally connect the
top perch to the middle perch (see Figure 5).
Allow glue to dry for 24 hours. If glue does not adhere to material reapply a heavy
spread and let dry for 24 hours. Wipe up any excess glue with a clean damp cloth.

New Cat Condos Cat Stairway Specifications

General

Type	Cat Stairway
Number of Steps	4
Color	Beige
Assembly Required	Yes
Material	Wood

Summary

Assembly Instructions

Preparation and Initial Setup

Unpack all contents in an open area before beginning assembly.

Connecting Rod Assembly Steps

Apply glue to connecting rods and insert them into base, middle, and top perches.

Final Assembly and Drying

Secure top perch, allow glue to dry for 24 hours, and clean any excess.