New England Arbors Country Corner Picket VA20234 User Manual

1. Corner Post (1) 3” x 3” x 43” - (8 cm x 8 cm x 109 cm) - White 10785, Brown 14094
2. Top Rails (2) 1 1/2” x 1 1/2” x 44.73” - ( 4 cm x 4 cm x 114 cm) - White 10787, Brown 14095
3. End Post (2) 3” x 3” x 38” - (8 cm x 8 cm x 97 cm) - White 10786, Brown 14096
4. 18” Pickets (6) 7/8” x 3” x 18” - (2 cm x 8 cm x 46 cm) - White 10132, Brown 14097
5. 19” Pickets (2) 7/8” x 3” x 19” - (2 cm x 8 cm x 48 cm) - White 10133, Brown 14098
6. Bottom Rails (2) 1 1/2” x 1 1/2” x 44.73” (8 cm x 8 cm x 114 cm) - White 10788, Brown 14099
7. 20 1/2” Pickets (2) 7/8” x 3” x 20 1/2” - (2 cm x 8 cm x 52 cm) -White 10134, Brown 14100
8. 23” Pickets (2) 7/8” x 3” x 23” - (2 cm x 8 cm x 58 cm) - White 10135, Brown 14101
Optional Materia
ls
3 Bags of pre-mix concrete for extra post stability.
Tools You Will Need
• Shovel
• Tape measure
General Information
Read Instructions through carefully before
beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 10 ft. x 8 ft. (3 m x 2.4 m) for unobstructed assembling.
• You should not need to use excessive force when assembling components.
Please read through before starting assembly.
IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.
Check Box for These Contents
In the event of damaged, missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to F ri. 8:00 AM to 4:00 PM EST).
(UK Tel: (44) 2038 687160 - Mon. to Fri. 1:00 PM to 10:00 PM GMT).
ASSEMBLY INSTRUCTIONS
Country Corner Picket
White Vinyl - VA20234
Brown Composite Vinyl -VA84050
1
43.7 in
110.9 cm
Ver 2.3/050217
7
5
4
3
1
2
8
6
38.7 in
98.2 cm
42.5 in
108.0 cm
48.9 in
124.1 cm
www.newenglandarbors.com
www.newenglandarbors.co.uk

New England Arbors Country Corner Picket VA20234 Specifications

General

Material	Vinyl
Width	48 inches
Color	White
Style	Picket
Assembly Required	Yes

Summary

General Information and Preparation

Read Instructions Carefully

Read all instructions thoroughly before beginning assembly for a smooth process.

Assembly Space and Surface

Use a non-abrasive surface and a 10x8 ft area for unobstructed, scratch-free assembly.

Assembly Force and Alignment

Avoid excessive force; components should fit without undue pressure.

Assemble the Post and Frame

Layout and Insert Top Rails

Position the corner post and insert top rails, ensuring correct orientation for picket insertion.

Insert Bottom Rails and Attach End Posts

Connect bottom rails to the corner post and attach end posts to complete the frame.

Position and Secure Frame

Place the assembled frame in dug holes, check for level, and fill with cement if desired.

Assemble the Pickets

Install Longest Pickets

Insert the 23-inch pickets first, guiding them through the top and into the bottom rail.

Install Remaining Pickets

Insert remaining pickets in descending order of length for balanced spacing.