New England Arbors London Trellis User Manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at
1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
(UK Tel: (44) 2038 687160 (Mon. to Fri. 1:00 PM to 10:00 PM GMT).
1. Arched Top Rail (1) - 10857
2. P ost Caps (2) - 10748-1
3
. P ost - Left (1) - 10858
4. P ost - Right (1) - 10859
5. Vertical Spindles (3) - 10860
6. Horizontal Spindles (7) - 10861
7. Bottom Rail (1) - 10862
8. Ground Mounting Extensions (2) - 10863
9. 5/8 ” (16 mm) Self-Auguring Stainless Steel Screw (12) - 20016
Tools You Will Need
• Cordless Drill
• Hammer
• Tape Measure
• Level
• Shovel
General Information
• Read Instructions through carefully before beginning assembly.
• When
assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ (1.5 m x 2.4 m) for unobstructed assembling.
• You should not need to use excessive force when assembling component.
The London Trellis
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
1
2
9
Not to Scale
7
3
5
6
IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.
V2.2/072717
8
4.5 in
(11 cm)
69 in
(175 cm)
27 in
(69 cm)
30 in
(76 cm)
78 in
(198 cm)
1.5 in
(4 cm)
79.2 in
(201 cm)
4
www.newenglandarbors.com
www.newenglandarbors.co.uk

New England Arbors London Trellis Specifications

General

Brand	New England Arbors
Model	London Trellis
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions Overview

Check Box for These Contents

Verify all parts are present before assembly. Call customer service for missing or defective parts.

Tools You Will Need

List of tools required for assembly, including cordless drill, hammer, tape measure, level, and shovel.

General Information for Assembly

Important tips for assembly, such as using a non-abrasive surface and ensuring adequate workspace.

STEP ONE: Assemble Trellis Frame

Assemble First Post

Lay one post and insert the bottom rail and three vertical spindles, then add seven horizontal spindles.

Attach Second Post

Connect the second post to the assembled trellis structure, inserting the top arched rail.

STEP TWO: Secure and Finish

Install Screws

Secure the trellis structure with screws at the indicated locations to ensure squareness and stability.

Install Post Caps

Push the post caps onto the top of the trellis posts as illustrated.

Mounting Into the Ground

Install Ground Mounting Extensions

Insert and secure the ground mounting extensions into the bottom of the trellis posts.

Install Trellis into Ground

Excavate holes, position the trellis, level it vertically and horizontally, and backfill with soil.