New Holland B110 User Manual

Guidance on how to avoid accidents and prevent injuries during machine operation and maintenance.

Essential rules to follow for safe repair, maintenance, and operation of the machine.

Safety precautions to follow before starting the engine or operating the machine.

Safety guidelines related to engine operation, cooling, and fuel systems.

Safety measures for working with the machine's electrical systems and batteries.

Safety precautions for handling hydraulic systems and fluid under pressure.

Safety advice for inspecting, inflating, and handling wheels and tyres.

Safety procedures for lifting and handling heavy components during removal and installation.

Recommendations for safe handling, storage, and disposal of fluids and substances.

Practical advice on handling fuels, oils, and coolants to prevent spills and health hazards.

General guidelines for cleaning, component preparation, and using cleaning fluids.

Procedures for replacing and installing hoses and tubes, including inspection for damage.

Instructions for correctly installing O-ring face seal fittings and hoses.

Guidance on selecting and measuring shims for adjustments.

Instructions for the correct installation of rotating shaft seals.

Lubrication and installation tips for O-rings to prevent damage.

Recommendations for heating bearings before mounting them on shafts.

Guidelines for mounting split socket and spiral spring pins.

Importance of checking hardware tightness and using torque charts.

Information on ordering genuine spare parts with necessary machine data.

Benefits of using specified equipment for optimal repair conditions and results.

Clarification on wear limits and directional references within the manual.

Procedure for safely moving the machine when the battery is disconnected.

Lists the different models covered in the manual, indicating available features.

Diagrams and labels identifying the main components of the backhoe loader.

Detailed technical data for the engine, cooling, fuel, transmission, and electrical systems.

Certified noise level data for the machine's internal and external sound.

Vibration levels measured for upper members and abdomen inside the operator's cab.

Specifications for different types of loader buckets, including capacity, width, and weight.

Specifications for backhoe buckets, including struck capacity, width, and weight.

Tyre sizes and specifications for the B110 model.

Tyre sizes and specifications for the B115 model.

Dimensional data and performance metrics for the loader attachment (sideshift version).

Dimensional data and performance metrics for the backhoe attachment (sideshift version).

Tables detailing lifting capacities for the backhoe dipper and boom at various configurations.

Description, operation, technical specs, overhaul, inspection, disassembly, assembly, stall test, and fault finding.

Description, operation, technical specs, overhaul, inspection, disassembly, assembly, stall test, and fault finding.

Technical specs, torques, controls, lubrication, oil flow, pressure points, power flow, 4WD, removal, assembly, fault finding.

Technical specs, controls, lubrication, pressure, cooler, hydraulic diagram, operation, power flows, gear layout, removal, assembly, fault finding.

Technical specifications, disassembly, assembly, and fault finding for the 4WD front axle.

Technical specifications, disassembly, assembly, and fault finding for the 4WS front axle.

Description, operation, technical specs, disassembly, assembly, and fault finding for the 2WS rear axle.

Technical specifications, disassembly, assembly, and fault finding for the 4WS rear axle.

Technical specifications for the brake system.

Details on hand brake adjustment and related components.

Information regarding brake cylinders and their function.

Details about the oil brake tank and its maintenance.

Procedure for bleeding the brake system to remove air.

Includes various hydraulic diagrams for different model configurations.

Description, operation, technical specifications, removal, components, and disassembly of the hydraulic pump.

Details on control valves, including Rexroth (mechanical/pilot) and solenoid valves.

Description, operation, and hydraulic oil flow for the swing system.

Covers various hydraulic cylinders for loader and backhoe attachments.

Technical specifications, operation, and disassembly of hydraulic control levers.

Procedures for diagnosing and testing hydraulic system faults and flow.

Overview of the chassis, its description, and operational aspects.

Details on components within, below, and attached to the chassis for removal and installation.

Specific torque values for chassis components to ensure secure assembly.

Information on the 2WS steering system.

Information on the 4WS steering system.

Technical specifications, components, disassembly, assembly, and fault finding for the power steering system.

Technical specifications for cab heating and air conditioning systems.

Description and operation of the cab heating system.

Principles, safety, operation, fault finding, flushing, evacuating, charging, and overhaul of the air conditioning system.

General information about the electrical system, including wiring repairs and fault finding.

Electrical diagrams for powershuttle cab, powershift cab, and 4WS systems.

Details on front and side instrument panels, speedometer calibration, and immobiliser circuit.

Information on the diagnostics display, symbols, setup menu, self-test, and error code retrieval.

Description, operation, fault finding, and starter motor details for the starting system.

Technical specifications, description, components, removal, checks, and fault finding for the alternator.

Technical specifications, description, replacement, maintenance, tests, and connections for the battery.

General introduction and testing procedures for various electrical components like switches, sensors, and solenoids.

Details on controls for the loader attachment.

Information on the self-levelling feature of the loader bucket.

Details on the safety strut for the loader attachment.

Procedure for removing the loader bucket.

Procedure for removing the loader from the 2WS machine.

Procedure for removing the loader from the 4WS machine.

Overview of the backhoe attachment's description and operation.

Details on the backhoe attachment with mechanical controls.

Details on the backhoe attachment with hydraulic controls.

Procedures for removing and installing the backhoe attachment.

Information on revising the telescopic dipper of the backhoe.