Need help?Do you have a question about the New Holland TL5.80 and is the answer not in the manual?
General| Engine Power | 80 hp |
|---|---|
| Weight | 3, 200 kg |
| PTO Speed | 540/540E rpm |
| Transmission | Synchro Shuttle |
| Engine Type | 4-cylinder turbocharged diesel |
Overview of controls and instruments for the operator's platform.
Details regarding the operator's seat and seat belt.
Controls located at the front of the tractor.
Description of controls found on the left side of the machine.
Description of controls found on the right side of the machine.
Controls located at the rear of the tractor.
Controls located in the overhead area of the tractor.
Controls located on the exterior of the tractor.
Details about the instrument panel and gauges.
Procedures for putting the machine into initial service.
Steps and procedures for starting the tractor's engine.
Instructions on how to safely stop the tractor's engine.
Steps for safely loading the machine onto a transporter.
Procedures for towing the machine in case of breakdown.
General information for working operations.
Details on transmission types and operation.
Operation and precautions for the rear PTO.
Operation of remote hydraulic valves and attachments.
Hitching and operating the three-point hitch.
Details on drawbars and towing implements.
Information and procedures for tractor ballasting.
Adjustments and specifications for the front axle.
Information related to the rear axle.
Procedures for adjusting wheel track.
General maintenance precautions and guidelines.
Overview of maintenance schedules and tasks.
Actions to take when warning lights illuminate.
Daily maintenance checks and procedures.
Specific service required after the first 50 hours.
Maintenance tasks to be performed every 50 hours.
Maintenance tasks for every 300 hours of operation.
Maintenance tasks for every 600 hours of operation.
Annual or 1200-hour maintenance tasks.
Maintenance tasks for 4000 hours or 4 years.
Various general maintenance procedures.
Procedures for storing the machine and post-storage preparation.
Troubleshooting by symptoms affecting various systems.
Machine dimensions for different cab configurations.
Information on fluids and lubricants used in the machine.
Specifications for key machine systems.
To Next Page