Need help?Do you have a question about the New Holland TM150 and is the answer not in the manual?
General| Engine Power | 150 hp |
|---|---|
| Transmission | Full Powershift |
| Weight | 6, 500 kg |
| Fuel | Diesel |
| Gears | 18 forward and 6 reverse |
| Displacement | 7.5 L |
| Transmission Speeds | 18x6 |
| PTO Speed | 540/1000 RPM |
| Type | Tractor |
| Engine | New Holland |
| Hydraulic Flow | 113 L/min |
| Fuel Tank Capacity | 340 liters |
| Engine Type | 6-cylinder diesel |
| Wheelbase | 2.84 m |
Crucial safety precautions and guidelines for operating the tractor safely.
Detailed safety warnings and precautions for tractor operation and maintenance.
Guidelines and warnings for safe tractor operation on roads and varied terrain.
Procedures and safety advice for starting, stopping, and general tractor operation.
Safe procedures and precautions for operating the Power Take-Off (PTO) system.
Overview and identification of controls located within the tractor's cab.
Identification and operation of the handbrake, throttle, and foot pedal controls.
Overview of switches, controls, and indicators on the tractor's main instrument console.
Details on the operation and features of the Power Command transmission system.
Step-by-step guide for starting the tractor engine in various temperature conditions.
Safety guidelines and warnings specifically for operating PTO-driven equipment.
Specific maintenance tasks required during the initial 50 hours of tractor operation.
Step-by-step instructions for changing the engine oil and oil filter.
How to check and maintain the oil levels in the transmission, rear axle, and hydraulic systems.
Steps for replacing the hydraulic and transmission oil filters.
Procedure for cleaning or replacing the engine's outer air cleaner element.
Procedure for checking and adjusting engine valve clearances.
Procedures for changing the oil in the transmission, rear axle, and hydraulic systems.
Steps for changing the oil in the four-wheel drive differential.
Procedure for changing the oil in the four-wheel drive planetary hubs.
Procedure for cleaning or replacing the engine's inner air cleaner element.
Instructions for cleaning and resetting the tractor's fuel injectors.
Procedure for calibrating the clutch system of the Dual Command transmission.
Steps for calibrating the Synchro Command transmission system.
Procedure for calibrating the clutch system of the Power Command transmission.
Explanation of error codes displayed by the tractor's electronic systems.
Guide to diagnosing and resolving common system issues.
Fault finding for Range Command and Power Command transmissions, including drive and gear issues.
Troubleshooting common problems with the Dual Command transmission system.
Fault finding for Synchro Command transmissions, covering engagement and noise issues.
Troubleshooting common problems related to the tractor's hydraulic system.
Troubleshooting common brake system problems, such as spongy pedals or excessive travel.
Troubleshooting common electrical system problems, including battery and starter issues.
Detailed technical specifications for the tractor's engine, including bore, stroke, and power.
Specifications for the various transmission options available for the tractor models.
Technical data for the tractor's hydraulic systems, including pressure and flow rates.
Specifications for the tractor's three-point linkage, including lift capacity.
Specifications for the front power take-off system, including engine speed requirements.
Specifications for the rear power take-off systems and their engine speed requirements.
To Next Page