Need help?Do you have a question about the New Holland TX Series and is the answer not in the manual?
General| Brand | New Holland |
|---|---|
| Model | TX Series |
| Category | Spreader |
| Language | English |
Assemble support plates left and right, measure 930mm from plate to strawchopper, use strawhood holes.
Assemble adjustment screws and plastic pipe.
Assemble gas struts ensuring free movement around adjustment screw.
Assemble guide plate and place as low as possible.
Assemble fan unit complete with spacer.
Adjust chaffspreader angle using adjustment screw for specified distance.
Replace original shaft with drive shaft and assemble pulley bracket with headscrew.
Mount pump unit, assemble V-belt, and check belt line.
Route pump unit hoses under engine to combine's left side.
Assemble hook assembly on the left inside of the support plate to strawchopper.
Assemble bracket for hoses and apply decals to combine sides.
Connect hoses from pump unit to fan unit.
Follow manual for hydraulic oil filling and testing procedures.
Check belt lines and ensure no oil leakage.
Leave user's manual and spare part list in the cabin.
To Next Page
