New Holland W130 User Manual

THIS ALERT SYMBOL SIGNALS IMPORTANT MESSAGES INVOLVING YOUR SAFETY.
Read and heed carefully the safety instructions listed and follow the precautions recommended to
avoid potential risks and to safeguard your health and your safety.
You will find this symbol in the text of this Manual referred to the following key words:
W130/W130TC
WHEEL LOADER
Workshop Manual
Print N° 604.13.492.00 English
II - 2005
WARNING
Cautions directed to avoid improper repair interventions involving potential consequences for the
operator’s safety.
DANGER
These warnings qualify specifically potential dangers for the safety of the operator or other per-
sons directly or indirectly involved.
IMPORTANT NOTICE
All maintenance and repair interventions explained in this Manual must be performed exclusively by the Service
Organization of the Manufacturer, observing strictly the instructions explained using, whenever necessary, the
recommended specific tools.
Whoever performs the operations reported without following exactly the precautions is responsible on his own, for
the damages that may result.
Neither the Factory nor any Organizations in its Distribution Network, including but not limited to national, regional
or local distributors, are responsible for any liability arising from any damage resulting from defects caused by parts
and/or components not approved by the Factory for use in maintaining and/or repairing products manufactured or
merchandized by the Factory.
In any case, no warranty of any kind is made or shall be imposed with respect to products manufactured or mer-
chandized by the Factory, when failures are caused by the use of parts and/or components not approved by the
Factory.

New Holland W130 Specifications

General

Brand	New Holland
Model	W130
Category	Construction Equipment
Language	English

Summary

Section 0 GENERALITIES

SAFETY RULES

Essential safety guidelines for operating and maintaining the machine.

SPECIFICATIONS

Technical details and performance characteristics of the machine.

DIMENSIONS AND WEIGHT

Physical measurements and weight specifications of the wheel loader.

TABLE OF FLUID CAPACITIES

Quantities of lubricants, coolants, and fuels required for the machine.

UNITS OF MEASURE

Conversion factors between metric and U.S. customary units.

STANDARD TORQUE SPECIFICATION

Torque values for various bolts, nuts, and studs used in assembly.

LOCTITE PRODUCT CHART

Guide to Loctite products for threadlocking, sealing, and bonding.

Section 1 ENGINE

GENERAL FEATURES

Overview of the engine's type, cycle, displacement, and power ratings.

LUBRICATION

Details regarding the engine's lubrication system, oil pressure, and filter.

DESCRIPTION OF MAIN GROUPS

Identification and illustration of major engine components.