To Next PageTo Next Page
Need help?Do you have a question about the Newage VersaRac series and is the answer not in the manual?
Warning about the risks of overloading the storage rack and potential injuries.
Provides phone numbers and email for product support.
Steps for safely unpacking the product and preparing for assembly.
Lists all components included in the package with their quantities.
Emphasizes reading instructions, proper installation, and avoiding misuse.
Details the maximum weight the rack can hold and how to distribute it safely.
Lists the tools required to assemble and install the VersaRac system.
Outlines the terms and conditions of the product's lifetime warranty.
Guides on selecting the installation site and orientation relative to ceiling joists.
Describes the process of attaching mounting angles to the ceiling joists.
Explains how to attach vertical posts to the mounting angles for desired height.
Details the assembly and installation of the rack's perimeter beams.
Covers the installation of the center support and cross supports.
Advises on choosing between parallel or perpendicular installation based on joist direction.
Guides on verifying joist spacing to match rack dimensions for a secure fit.
Instructions on finding and marking the center of ceiling joists using a stud finder.
Steps for aligning mounting angles and drilling pilot holes for lag bolts.
Details on fastening the mounting angles with lag bolts, washers, and a socket.
Guides on measuring and installing the second ceiling mounting angle at the correct distance.
Instructions for installing the rest of the ceiling mounting brackets in the same orientation.
Advises on measuring the desired height from the ceiling to the rack's bottom.
Instructions for combining posts to achieve greater heights, using bolts, nuts, and washers.
Details on bolting vertical angle posts to ceiling angle brackets using hardware.
Guides on bolting Long Perimeter Beams A and B together for 6' or 8' assemblies.
Instructions for fitting short perimeter beams into the bottom of vertical angle posts.
Details on inserting long cross beam assemblies into the vertical angle posts.
Explains how to attach the center support beam using bolts, nuts, and washers.
Instructions for inserting cross supports into the top of the long cross beam assemblies.
Guides on placing wire grid platforms, including those with notched corners.
Advises on installing additional joists if ceiling joist spacing is incompatible with the rack.
Explains connecting two racks by sharing mounting angles, reducing weight capacity.
Warns against installing more than one rack on two overhead ceiling joist supports.
Describes how to adjust vertical posts for installation on a slanted ceiling.
Details bracing one end of the rack against a wall using a wood spacer.
Instructs to install an additional ceiling joist perpendicular to engineered joists for secure mounting.
Warns that engineered joists are not suitable for direct fastening of mounting angles.
Recommends consulting a professional for installing joists into engineered ceiling structures.
General| Brand | Newage |
|---|---|
| Model | VersaRac series |
| Category | Racks & Stands |
| Language | English |
