NewAir AF-310 - Troubleshooting

12
http://www.NewAir.com
1. Remove the back cover and dust filter from the unit.
2. Remove the cooling pad from the unit.
3. Rinse the filter net and cooling pad with water, and then dry them in direct
sunlight.
4. Replace the filter and cooling pad.
TROUBLESHOOTING
Problem
Possible Causes
Solution
The unit produces
no air.
Some parts are
damaged.
Take the unit to an
authorized service agency or
technician for repairs.
The unit cannot
be turned off.
Some parts may be
damaged.
Take the unit to an
authorized service agency or
technician for repairs.
The unit makes a
lot of noise.
Foreign objects are
stuck inside the unit.
The motor Is defective
or the air wheel is
loose.
Take off the side cover
board and net and remove
any foreign objects.
Take the unit to an
authorized service agency or
technician for repairs.
The fan doesn’t
humidify.
There is insufficient
water.
The pump is defective
or the water pipe has
come off.
Add water to the tank.
Take the unit to an
authorized service agency or
technician for repairs.
There is no swing.
The swing motor is
defective.
Take the unit to an
authorized service agency or
technician for repairs.