Newbeem Smart Outlet User Manual v2.0
Customer service: support@newbeem.com
2.
Install hardware
Plug smart outlet into any wall outlet, wait for 20 seconds, the user will
see the red LED indicator light turns on. If the red LED does not turn on,
please return for replacement.
Plug in a small appliance in the Wi-Fi socket of the outlet.(with the Wi-
Fi icon below)
The Wi-Fi controlled outlet has a maximum power output of
200W, check the device or appliance power rating before plug in, Do not
plug in a device or an appliance which will consume more than 200W
power. The dimmer functions of smart outlet was intently designed for
lighting system .
To Next Page
Loading...