Need help?Do you have a question about the Newco LCD-2 Dual and is the answer not in the manual?
Steps for physically setting up the coffee machine, including water supply and power connection.
Details of the manufacturer's warranty terms, conditions, and coverage for the equipment.
Procedure to access the machine's control panel and enter the programming setup menu.
Guide on how to adjust the dispensing temperature for hot beverages.
Configuration options for enabling or disabling Bag-in-Box (BIB) liquid output tracking.
Instructions for enabling or disabling the audible buzzer alarm for various events.
How to program individual dispenser switches for specific products or blends.
Detailed steps for setting portion control, continuous flow, and disabling selector switches.
Step-by-step guide for cleaning and sanitizing the machine's fluid pathways.
Procedure to prime dispensing pumps without running a full sanitization cycle.
Guidance on how to properly install and connect product Bag-in-Box (BIB) containers.
Procedure for flushing the mixing chamber with water for maintenance.
Troubleshooting guide for thermistor warnings and heater run errors.
Diagnosing issues related to tank fill levels and serial communication errors.
Identifying and resolving errors concerning motor circuits and dry tank operation.
Provides the physical measurements and dimensions of the LCD-2 coffee dispenser.
Details on voltage, wattage, and amperage for different LCD-2 model configurations.
Wiring diagram for the 120V Hot/Ambient configuration of the LCD-2 dispenser.
Wiring diagram for the 220V configuration of the LCD-2 coffee dispenser.
Wiring diagram for the 220V convertible voltage LCD-2 model.
Replacement parts for the machine's base structure and door components.
Various tubing, connectors, elbows, and clamps for fluid delivery systems.
Replacement parts for the water tank, gaskets, sleeves, and connectors.
Parts related to the control panel, display board, switches, and labels.
Replacement parts for solenoid valves, flow control components, and assemblies.
Components for the drip tray, including cup guides and grids.
Various small parts such as screws, nuts, washers, grommets, and power cords.
Spare parts specific to the metal door variant of the LCD-2 dispenser.
List of different LCD-2 models with their corresponding part numbers for easy identification.
General| Brand | Newco |
|---|---|
| Model | LCD-2 Dual |
| Category | Beverage Dispenser |
| Language | English |
To Next Page
