newcook Delicious - Programming the Pot

58
Programmable pot
4. PROGRAMMING THE POT
Ifyouwanttoprogramyourprogrammablepotsothatyouwillhaveyourfreshlycookedfoodatacertaintime,whenthe
displayshows“0000”:
1. Press ‘Time’, select the remaining time to serve the food, that is, within how many hours you want to eat with
buttons(+) y (-). Mealtime is set at intervals of 10 minutes by pressing the + button increases up to 24 hours.
Toselectlunchtime,youmusttelltheprogrammablepotmanyhoursleftforservingfood,notthetimewhenyouwant
to eat, it is important to indicate either the remaining time to eat.
2. Select the menu, the cooking time and the kind of pressure,as it described in the previous section.
3. Conrm selectionwiththe‘Cook’button.Theprogrammablepotautomaticallycalculateswhentostartcookingso
that the food is freshly made at the scheduled time, if the cooking time is longer than the time remaining before the
scheduledtime,yourprogrammablepotwillstartthecookingcycle,togetascloseaspossibletothepresettime.
4. IMPORTANT: To program a recipe, time must be superior to 1:30 h, otherwise begin cooking pot right then.
Duringthetimeout,thepotwilldisplaythetimeremainingtoeatandtheredlightwillturnright.
Ifwhilecookingorwaitingapowerfailureoccurs,theprogrammablepotrememberitsprogrammingandwhenthecurrentis
backyourprogrammablepotwillcontinueatthesamepointwherethecookingprocessstopped.
Theprogrammablepotincludesthe“warm”systemwhichisoperatedautomaticallywhenitstopscookingandkeepsthe
foodwarmindenitelywithoutcookingitagain,untilyoupresstheCANCELbutton.Remembertocancelthisfunctiontonish
using your programmable pot.