➇ If you like, you can specify the drive
letter designation for your new drive.
Otherwise, one will automatically be
assigned. Click “Next.”
➈ Before you can use the
drive, it must be formatted. On
most systems running Windows
2000 or later, it is advisable to
specify the le system as NTFS.
Leave the Allocation unit size as
“Default,” and feel free to give
the drive whatever name you
prefer. Be sure to check the box
“Perform a quick format”. If you
do not, it will likely take several
hours for your drive to format.
Click “Next.”
➉ At the end of the Wizard,
you will see a summary of the
information that you specied
during the previous steps.
Click “Finish.”
Chapter 2 - Formatting
Newer Technology miniStack v3
To Next Page
Loading...
Need help?
General
