Need help?Do you have a question about the Newland NLS-EVK3030 and is the answer not in the manual?
Provides instructions on how to use the NLS-EVK3030 software development board.
Visual representation of the EVK3030's electrical schematic.
Illustrates the functional blocks and connections of the EVK3030.
Shows the physical arrangement of components on the EVK3030 board.
Details the pin assignments for scan engine connectors J1 and J2.
Specifies the pin functions for the J1 connector on the EVK3030.
Specifies the pin functions for the J2 connector on the EVK3030.
Demonstrates how to connect a scan engine using a 12-pin FFC cable.
Presents the complete circuit diagram for the EVK3030 development board.
Guides on connecting the EVK3030 to a PC using the J3 (RJ45) port.
Guides on connecting the EVK3030 to a PC using the J4 (USB-A) port.
Guides on connecting the EVK3030 to a PC using the J5 (USB-B) port.
General| Category | Motherboard |
|---|---|
| Brand | Newland |
| Model | NLS-EVK3030 |
| Operating System | Linux |
| Ethernet | 10/100 Mbps |
| CPU Cores | 1 |
| Serial Ports | 2 x UART |
| GPIO | Available |
| Dimensions | 100 mm x 72 mm |
To Next Page