To adjust the depth and the angle of the headrest, you must:
- Loosen the screw #2
- Adjust the headrest to the depth and to the desired tilt
- Retighten the screw
To adjust the lateral position of the headrest (optional), you must:
- Loosen the 4 screws #3
- Slide sideways headrest up to the desired position
- Retighten the screws
Caution:
If the seat is used as a passenger or driver's seat in a car, the use of the headrest supplied with the
wheelchair is mandatory.
The headrest should be adjusted to the height of the user's ears. In the event of a collision, improper
adjustment of the headrest can cause serious and irreversible injury.
To Next Page
Loading...